Practice with purpose

NEXUS / THE TRAINING SOFTWARE

Every session.
A step forward.

Focused skill drills put operators in realistic situations. Trainers get the information to see what’s improving and what needs more practice.

Configure NEXUS ↗ See the modules ↓

THE COMPLETE NEXUS SYSTEM

Preloaded. Matched.
Ready to go.

Your NEXUS system arrives as a complete training package: computer, VR headset, your choice of platform, steering wheel, pedals and fingertip controller. The software comes preloaded and the system is ready to go upon delivery.

Computer + software

A high-performance computer with NEXUS already installed. No need to source a separate computer or install the training software yourself.

Headset + immersion

The VR headset is supplied as part of the NEXUS package, matched to the computer and software configuration.

Platform + controls

Choose Fold N Go or Classroom Standard, complete with the steering wheel, pedal set and fingertip controller.

Unpack, position the equipment and connect it for your first training session.

Configure your complete NEXUS system ↗

EXPLORE THE TRAINING MODULES

Start simple. Build capability.

Browse driving, load handling, attachment and practice exercises. Open a category to see each module and its focus.

Getting started3 exercises

Learn the controls and begin moving the truck and a pallet.

Introduction to ControlsBecome familiar with the simulator controls.

Raise Forks and DriveCombine fork positioning with basic driving.

Lifting Pallet and TravelPick up a pallet and begin travelling with a load.

Pallets, racking and loading11 exercises

Build load-handling skills through placement, transport and loading tasks.

Introduction to RackingBuild confidence with guided pallet placement, accurate positioning and controlled withdrawal.

Introduction to Loading Trucks & TrailersPractice approaching, positioning and placing loads inside a trailer before progressing to advanced loading tasks.

Introduction to Unloading Trucks & TrailersRetrieve a pallet from a trailer, back out under control and place it in the staging area.

Placing Pallet on RackingPractice placing a pallet into racking.

Moving Pallet on RackingReposition a pallet within a racking task.

Travelling with PalletPractice driving while carrying a pallet.

Complete Test in RackingBring racking skills together in a complete exercise.

Loading a Flatbed — BasicPractice the basic flatbed-loading task.

Loading a Flatbed — AdvancedProgress to the advanced flatbed-loading task.

Loading a Trailer — BasicPractice basic trailer loading at a dock.

Loading a Trailer — AdvancedProgress to advanced trailer loading at a dock.

A-Frame Load Handling4 exercises

Developed for MHSA in Alberta, these sit-down counterbalance exercises build control with tall, wide loads.

A-Frame Pick and SetPractice balanced pickup, accurate positioning and controlled placement.

Figure 8 with an A-FrameDevelop turning and maneuvering skills while maintaining control of an A-frame load.

A-Frame Ramp HandlingPractice controlled travel on a ramp with attention to load balance and positioning.

A-Frame Trailer LoadingPosition and load A-frames onto a trailer using deliberate, controlled movements.

Driving and stacking drills9 exercises

Focused exercises develop turning, positioning and stacking skills.

Figure 8 CourseFollow a figure-eight driving course.

90-Degree SlalomPractice a sequence of right-angle maneuvers.

90-Degree TurnsDevelop control through right-angle turns.

90-Degree ManeuversPractice offset maneuvering.

Pallet StackingPosition and stack pallets.

Wire Bin Stacking — BasicBegin stacking wire bins.

Wire Bin Stacking — AdvancedProgress to advanced wire-bin stacking.

Figure 8 with Wire Bin — IntermediateNavigate a figure-eight course carrying a wire bin.

Figure 8 with Pallet and BoxPractice a figure-eight route with a palletized load.

Fork extensions4 exercises

Learn installation and operation with extended forks.

Fork Extension — BasicIntroduction to operating with fork extensions.

Extended Fork InstallationPractice the fork-extension installation task.

Fork Extension — AdvancedDevelop load-handling skills with extensions.

Figure 8 with Fork ExtensionManeuver through a figure-eight course with extensions.

Single/double forks3 exercises

Practice attachment controls and handling multiple pallets.

Introduction to Controls — Single/DoubleLearn the single/double-fork attachment controls.

Double Forks Moving a LoadMove a load using double forks.

Single/Double Pallet StackingPractice pallet stacking using single/double forks.

Clamp handling1 exercise

Practice handling and stacking boxes with a clamp attachment.

Box Stacking with ClampUse the clamp attachment to position and stack boxes.

Practice variants11 exercises

Repeat the driving and handling exercises to build familiarity.

Figure 8 — PracticeRepeat the figure-eight course.

90-Degree Slalom — PracticeRepeat the slalom exercise.

90-Degree Turns — PracticeRepeat right-angle turns.

90-Degree Maneuvers — PracticeRepeat offset maneuvers.

Pallet Stacking — PracticeRepeat pallet stacking.

Wire Bin Stacking — PracticeRepeat wire-bin stacking.

Box Stacking with Clamp — Advanced PracticeRepeat advanced clamp stacking.

Single/Double Pallet Stacking — PracticeRepeat stacking with single/double forks.

Wire Bin Stacking — Basic PracticeRepeat introductory wire-bin stacking.

Box Stacking with Clamp — Basic PracticeRepeat introductory clamp stacking.

Free RoamingPractice instructor-directed tasks in an available training environment.

Module names and availability may vary by software version and licensed configuration. We’ll confirm the modules supplied with your system.

LOOKING AHEAD

Training that grows with your work.

These planned modules and concepts are separate from the current catalogue. Final scope and release timing will be announced as development progresses.

PLANNED / SCOPE UNDER REVIEW

Specialized attachment training

Proposed training covers paper roll clamps, rotators, barrel clamps, slip-sheet push/pull attachments, carpet poles, trash tippers, Basiloid handling and unbalanced or wide loads. The goal is task-focused practice with the right attachment and load.

FUTURE MODULE CONCEPT

Tablet-directed product retrieval

Follow a digital pick list, locate the correct product, verify the selection and move it to a staging area. Designed to connect driving skills with everyday warehouse picking workflows.

FUTURE MODULE / ON HOLD

Pre-operation inspection

A planned interactive inspection experience would let students identify equipment issues and distinguish acceptable conditions from defects needing attention. This module remains on hold and is not included in the current release.

Operator wearing an HTC VIVE headset using the Fold N Go simulator

SEE THE SKILL. TRACK THE PROGRESS.

Training that trainers can follow.

Review module scores, completion, timed infractions and student records. Export results to Excel and use multi-angle session replay on the training computer.